Follow

Power Cab Programming Modes

Since we only have two wires coming out there is no true programming track output.

However, The Power Cab has two different programming MODES. 

Program track mode will program ANY AND ALL locomotives on the track  at the same time. It does not care what is on the track everything gets programmed.

OPS mode programming  “Programming on the main” is different in the fact that the first thing you do is specify which loco you are working on by specifying the EXISTING loco number. Then all other locos not using that number will ignore the commands being sent.

Some locomotive decoders require you to use one method or the other some will let you use either one.

Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request

Comments