The number of RECALLS for each cab can be changed within the “SET CAB PARAMS” menu (see PROG button description). The factory set value is two. You may also “clear out” any locomotives in the recall slots using the “SET CAB PARAMS” menu. We don’t advise using RECALL in Yard mode.
To change the number of recall slots on a Pro Cab or Power Cab: Hit the Prog /ESC key 6 times to get to the cab parameters menu. Hit enter twice. Then enter your desired number of recall slots. Press escape getting back to the main menu.
Set Number of Recalls on a Cabo06: If your NCE DCC System allows more than two Recalls, you can adjust this number from 1 to 6. Do the following: 1) Press the Shift/Esc key three times (both decimal points above the 1 and 2 of the LED display will be on). 2) Press the Direction key. Enter a number, any d; any from 1 to 6 is valid. The LED display will immediately return to its normal screen.
==========================================================
The recall button is simply a “memory function,” nothing more. It remembers up to the last six numbers you entered on the keypad. So, you must be careful when using the “select loco” button and the keypad to enter a new loco number. You may inadvertently overwrite a number you want to keep in the rotating list of numbers stored in the recalled button. You may ALSO find that you accidentally enter the SAME NUMBER several times in the recall button slots.
Example:
If LOC 1234 is ALREADY on the screen, you use the “enter loco” button, type in “5678,” and press enter. You just put 5678 in the memory slot IN PLACE OF 1234. So now 1234 no longer exists, but 5678 is in that slot instead.
Comments