CS02 - Command Station Only

Command Station Only. No track power booster or power supply. A cheap power supply that will work can be picked up at a local thrift store, radio shack, or electronics retailer

Requires a 1amp power supply.  12 to 22 VAC  or  12 to 30VDC

Cab bus output is 1 amp / 12v - max length 40 feet without adding power

Control bus output is 250mA current loop design. 

 If you do not own a multimeter here is a link to an inexpensive one from Home Depot - 



Was this article helpful?
0 out of 2 found this helpful
Have more questions? Submit a request