D14SR Direct plug-in, HO decoder, 6 function, NMRA 8 pin

Designed specifically to fit decoders with an 8 pin socket such as: Atlas GP40, AEM-7, GP7, U33C, U36C, C30-7,U23B Kato RS2, RSC2, C44-9W, SD40-2, SD45 Bachmann Spectrum Steam Locomotives LifeLike FA1, ER Models Sharknose, FP7.

All lighting outputs including headlights are full track power.

If you use LEDs we recommend a 1K ohm 1/4 Watt series resistor for each output

➙ Miniatronics #12-310-05 Yellow Glow White LEDs.
➙ Richmond Controls (or equivalent) Golden White LEDs.
➙ Miniatronics #18-712-10 (12v) or #18-014-10 (14v) incandescent bulbs

Function output ratings: Due to the high inrush current of incandescent grain-of-wheat type bulbs (about 10 times their normal operating current) function outputs are rated at 40mA each if used with incandescent bulbs. We recommend the Miniatronics part number mentioned above. If you wish to use 50-100mA rated lamps we recommend a 22 ohm 1/4 Watt series resistor in function leads with each bulb (this will also greatly extend bulb life).




Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request