This does NOT clear Cab id's from throttles. Only the command stations.
To clear possible cab id conflicts from a Power Pro command station:
1. Prog/esc 5 times, to go to “set cmd station”
2. Press enter 33 times, to scroll thru the menu options. The very last one is “clear all cab memory”
3. Reboot command station
4. Each cab will need to be plugged in one time, to register its existing cab id that is stored in the cab.
===================================================
To clear possible cab id conflicts from a Powercab:
***** note this is a "factory reset" of the Powercab**** you will lose ALL stored information such as consists!
1. Prog/esc 5 times, to go to “set cmd station”
2. Press enter 12 times, to scroll thru the menu options.
3. press 6 to Reset system, 1 to confirm your selection
4. Powercab will Reboot
4. Each cab will need to be plugged in one time, to register its existing cab id stored in the cab.
Comments