To select a locomotive for operation:
Press the SELECT LOCO button
Enter the 1 to 4 digit address of the loco/consist to be operated. A “Leading Zero”
is necessary for long addresses below 128. An asterisk will be displayed before any
long address below 128 (example below).
Press the ENTER key.
Locomotive address examples:
4421 = Long Address
006 = Long Address as entered.
*006 = Long Address as displayed
45 = Short Address as entered
045 = Short Address as displayed
LOC: will be displayed when addressing a single locomotive
CON: will be displayed when addressing a Consist.