5-amp, 10-amp, and CS02 System Manuals

Please ignore any "version numbers" on the front covers. The most recent 5-amp system, 10-amp system, AND CS02 manuals are all labeled as PH-PROv2007.pdf.  

The 5-amp, 10-amp, and CS02 are all identical from a firmware and operational perspective. See attached for the manual and diagrams. The CS02 has no track power booster.

Important Updates: Our systems use a FLOATING bond wire, not EARTH ground. Do not ground any component to a cold water pipe or earth ground. If you have a system that uses multiple boosters, case bond all the boosters together and to the command station with the same size wire you use for the track bus. This bond wire acts as a drain for stray voltage.

Note: The CS02 has no separate manual since it shares identical parts with the Ph-Pro 5-amp system box and the PH10 system. The CS02 is normally sold as part of the PH10 system and is the same manual as the Ph-Pro system.

Please note that some of these manuals are very old. They are provided for reference only.

Find your EPROM version here:



Was this article helpful?
3 out of 5 found this helpful
Have more questions? Submit a request