Follow

Gwire - Retired

G Wire can be plugged into an NCE command station. When plugged in it will act as a procab throttle. When on wireless it uses selectable wireless channels and has no command station. It sends full DCC commands via wireless - no RB02

for live track systems - power thru rail, no dcc via rail only raw  AC or DC system power. The loco has wireless receiver, decoder, and booster on board.

For dead rail - wireless receiver, decoder, and booster and battery

 Gwire DCC decoders are usually from CVP( air wire) or QSI

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments