The AR10 is an automatic reverse loop controller AND circuit breaker for DCC layouts.
The part number for the AR10 is 524-233 or 5240233
It requires just four connections, two to the main line track power and two to the loop. In addition it functions as a circuit breaker for the reverse loop. Recommended for DCC systems from 1 to 10 Amps. The AR10 will work with any DCC system from any manufacturer and all NCE systems including the Power Cab.
Buy it Now here: https://www.ncedcc.com/online-store/AR10-Auto-Reverser-with-circuit-breaker-p194585873
Make sure no other track power devices like circuit breakers or frog juicers are inline before or after the AR. In order for the AR to function correctly it needs to have a direct connection to your main DCC system and the output is directly connected to the AR loop, the loop must be double gapped on both ends and the gaps should be after any switches.
For details on wiring an AR loop go here: https://www.wiringfordcc.com/track_2.htm#c4
Features of the AR10:
Automatically controls polarity of DCC reverse loops
Provides short circuit protection for loop
Ready to run without any programming
Trip current adjustable 1 to 10 Amps
Easy hookup using screw terminals, no soldering
Solid state design provides silent, reliable operation
Status indication LED
Additional output for remote LED
Automatic or manual reset after short circuit shutdown
Adjustable short circuit response time
Automatically controls polarity of DCC reverse loops
Provides short circuit protection for loop
Ready to run without any programming
Trip current adjustable 1 to 10 Amps
Easy hookup using screw terminals, no soldering
Solid state design provides silent, reliable operation
Status indication LED
Additional output for remote LED
Automatic or manual reset after short circuit shutdown
Adjustable short circuit response time
Comments